Alpha Solarsmart on tile fixing kit

Product Description

The key features of a flat plate collector include; an absorber plate from which heat can be transferred to a solar fluid; a cover which is transparent to solar radiation; insulation at the back and sides of the absorber plate; a weatherproof case for all round protection. Alpha SolarSmart uses a flat plate collector, which is glazed and insulated to ensure maximum solar gain at all times. The collector can be supplied in portrait or landscape versions and is easily fitted into the roof flashing plate with six securing bolts, which locate on to the pre-fitted brackets. The collector must always be able to fully drain back, therefore the lowest part of the collector must be above the pipes of the drain back unit. SolarSmart must be used in conjunction with an Alpha combination boiler and fitted with the Alpha Solar Valve, which is supplied with the system.

Features

• Unique combi-based solar thermal system that can reduce the amount of gas used to provide hot water by up to 60%
• Solar Valve ensures boiler is only used as a back-up so less gas is used
• Available with 90 litre wall-mountable cylinder or 150 litre floor standing cylinder
• Collector panel available in portrait and landscape versions and can be fitted 'in-roof', 'on-roof' or on flat roofs using a special A-frame
• Easy plug in controls from the solar panel sensor and drain back pump cylinder control box
• Fully WRAS approved system.

• Alpha_Brochure